Group 42 Automotive Batteries
|210 - 650||Cold Cranking Amps (CCA)|
|65 - 95||Reserve Capacity Minutes|
|Length:||9 1/2" (24.2 CM)|
|Width:||6 7/8" (17.5 CM)|
|Height:||6 7/8" (17.5 CM)|
|Body Style:||Cutaway with European Style top|
|Terminals:||Right Positive Top Post STD/SAE|
|Flanges:||Side Arm and Face Sloped Foot|
Electricals:We measure battery power with two numbers: Voltage and Capacity. All 42 batteries provide 12 Volts and strong international standards have made sure that everyone agrees on what Voltage means and how to measure it. Capacity, however, varies between manufacturers and brands. To complicate matters further, we measure automotive battery capacity in a variety of ways.
Capacity measures the number of electrons a battery can provide. In general, we measure battery capacity in amp hours, or watt hours, however, in automotive applications, we care more about how much electrical power a battery can supply instantaneously to start the engine. We measure this instantaneous power in CA, Cranking Amps, and CCA, Cold Cranking Amps. Batteries store chemical energy and release it through temperature sensitive chemical reactions. In cold climates, we only care about CCA, because they report how much instantaneous power the battery can supply at zero degrees Fahrenheit. When new, Group 42 batteries must provide a minimum of 210 CCA and a maximum of 650 to meet standards but many manufacturers exceed the requirements.
Modern vehicles increasingly rely on their batteries to power peripheral electrical features like sound and entertainment systems, navigation computers, USB ports, light bars, winches, inverters, communications devices, and countless other specialized electrical equipment. We call these features deep cycle applications because they draw smaller amounts of power over longer time periods. We measure deep cycle capacity in Amp Hours or Reserve Capacity Minutes. To meet specifications, new group 42 batteries must provide at least 65 Reserve Capacity Minutes and a maximum of 95 but many batteries exceed these capacity requirements.
Mechanicals:Group 42 batteries have Cutaway body shapes with overall dimensions of: 9 1/2" X 6 7/8" X 6 7/8" or 24.2 CM X 17.5 CM X 17.5 CM. The 9 1/2" (24.2 CM) length includes the flanges. The 6 7/8" (17.5 CM) length includes the flanges. The 6 7/8" (17.5 CM) height includes the European Style top and the terminals plus any protruding acid caps, but not any raised lifting straps or handles.
Vehicles can fasten group 42 batteries with top mounted hold down straps/bars or by gripping any of its Side Arm and Face Sloped Foot flanges, and connect electrically via leads fit for Right Positive Top Post STD/SAE terminals.
Example Battery Images:
More example images coming soon.